1) There is no local MTU learnt. Could you please configure a MTU value on the local interface. You may configure a service instance on the router and then assign a MTU value to that service instance. this shall help to sync up the MTU between the ASR9k and the ASR1k
2) There is no local label seen. The above may be the cause for the same.
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
Introduction Basic configuration for netflow Scale parameters for
netflow Netflow support Architecture Packet flow for netflow Inside the
LC CPU Netflow Cache size, maintenance and memory Sample usage Cache
Size Aging Permanent cache Characteristics Which...