Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

AutoQoS Marking at CE done. PE router?

Hi there,

I've implemented an AutoQoS at managed CE router which is running MPLS VPN. At the PE router, I need to match the mpls experimental bits, kind of confuse to do at PE router.

BTW, is there a such for AutoQoS for PE router, particularly on MPLS VPN?

Thanks in advance.

Below is the config at CE:

!

class-map match-any AutoQoS-VoIP-Remark

match ip dscp ef

match ip dscp cs3

match ip dscp af31

!

class-map match-any AutoQoS-VoIP-Control-UnTrust

match access-group name AutoQoS-VoIP-Control

!

class-map match-any AutoQoS-VoIP-RTP-UnTrust

match protocol rtp audio

match access-group name AutoQoS-VoIP-RTCP

!

policy-map AutoQoS-Policy-UnTrust

class AutoQoS-VoIP-RTP-UnTrust

priority percent 70

set dscp ef

class AutoQoS-VoIP-Control-UnTrust

bandwidth percent 5

set dscp af31

class AutoQoS-VoIP-Remark

set dscp default

class class-default

fair-queue

!

!

ip access-list extended AutoQoS-VoIP-Control

permit tcp any any eq 1720

permit tcp any any range 11000 11999

permit udp any any eq 2427

permit tcp any any eq 2428

permit tcp any any range 2000 2002

permit udp any any eq 1719

permit udp any any eq 5060

!

ip access-list extended AutoQoS-VoIP-RTCP

permit udp any any range 16384 32767

!

1 REPLY
Purple

Re: AutoQoS Marking at CE done. PE router?

Hi Maher,

At this point in time, Cisco only supports AutoQoS for VoIP and for Enterprises. I don't think there are too many carriers out there who would be interested in such a feature since they would want to customise QOS parameters to their network and not use a boiler-plate automatiically-generated configuration.

Paresh

130
Views
0
Helpful
1
Replies
CreatePlease login to create content