Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Autotunnel in single route processor scenario

Just to be totally sure. Autotunnel is incompatible with single route processor systems, e.g. an 7600 with only one supervisor installed, as it would be configures with stateful switchover (SSO) by default.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Autotunnel in single route processor scenario

Hi,

It's supported as any other feature. What is not supported is autotunnel is not SSO aware so during a switchover, your tunnel will flap and you will loose traffic.

HTH

Laurent.

2 REPLIES
Cisco Employee

Re: Autotunnel in single route processor scenario

Hi,

It's supported as any other feature. What is not supported is autotunnel is not SSO aware so during a switchover, your tunnel will flap and you will loose traffic.

HTH

Laurent.

New Member

Re: Autotunnel in single route processor scenario

Hi Laurent

Thanks for your reply. This is why Netpro is great... Just to clarify the manuals :)

Regards,

Lars

160
Views
0
Helpful
2
Replies