cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
8983
Views
0
Helpful
6
Replies

Basic Concept of Xconnect in the case of AToM

inderdeeps
Level 4
Level 4

Hello

What is the basic concept of Xconnect in the case of AToM?

How AToM can be implemented in the live networks? What are the issues that can faced in the AToM technology?

I am unavair of this concept as i need to start this topic, Pls help me out how can i start to implement this?

Thanxs in advance for guiding me....

Regards!!!

Inderdeep

2 Accepted Solutions

Accepted Solutions

Hi Inder

You could also get good information from given link

http://www.mplsvpn.info/search/label/L2VPN

regards

Shivlu Jain         

View solution in original post

Mohamed Sobair
Level 7
Level 7

Hi,

AToM is the way of carrying layer-2 protocols over MPLS. these layer-2 protocols are , Ethernet , HDLC , PPP , Frame-relay, and ATM.

The L2VPN is carried in point to point fashion and its TTL value always set to 2 , the top label is the tunnel label and the inner label is always going to be the VC label

VPLS is carried in point to multipoint fashion and its TTL value alwys set  to 255.

Ethernet Over MPLS allows CDP,STP, and VTP to be tunneled over MPLS.

Ethernet Over MPLS has two Modes:

1- Port Mode

2- Vlan Mode

Besides what others has suggested, Bellow is one excellent resource:

---  Layer 2 VPN Architecture (Cisco press)

HTH

Mohamed

View solution in original post

6 Replies 6

Giuseppe Larosa
Hall of Fame
Hall of Fame

Thanxs for sharing your knowledge....

Regards

Inderdeep

http://www.networksbaseline.in/

Hi Inder

You could also get good information from given link

http://www.mplsvpn.info/search/label/L2VPN

regards

Shivlu Jain         

Hi Indeer

Please find the attach sample config. Were you can get an good idea to cofigure AToM.

& also please refer the below link were you can learn more about AToM.

http://fengnet.com/book/MPLS%20Configuration%20on%20Cisco%20IOS%20Software/ch11.html

Regards

Chetan Kumar

Thanxs shivlu and chetan...

 

Cheers!!!

Inderdeep

http://www.routexp.com

http://www.networksbaseline.com

Mohamed Sobair
Level 7
Level 7

Hi,

AToM is the way of carrying layer-2 protocols over MPLS. these layer-2 protocols are , Ethernet , HDLC , PPP , Frame-relay, and ATM.

The L2VPN is carried in point to point fashion and its TTL value always set to 2 , the top label is the tunnel label and the inner label is always going to be the VC label

VPLS is carried in point to multipoint fashion and its TTL value alwys set  to 255.

Ethernet Over MPLS allows CDP,STP, and VTP to be tunneled over MPLS.

Ethernet Over MPLS has two Modes:

1- Port Mode

2- Vlan Mode

Besides what others has suggested, Bellow is one excellent resource:

---  Layer 2 VPN Architecture (Cisco press)

HTH

Mohamed