Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

ar
New Member

bgp send-label

I am simulating basing bgp send-label functionality.

I have two routers.

 

R1 <--> R2

 

-Running ISIS as IGP

-Ibgp peer using loopback

-running bgp with send-label

 

R1 advertising 1.1.1.1 loopback IP

R2 advertising 2.2.2.2 loopback IP

 

But there are no labels..

 


R1#sho ip bgp labels
   Network          Next Hop      In label/Out label
   1.1.1.1/32       0.0.0.0         imp-null/nolabel
   2.2.2.2/32       2.2.2.2         nolabel/imp-null

 

 

R1

router bgp 1
 bgp log-neighbor-changes
 neighbor 2.2.2.2 remote-as 1
 neighbor 2.2.2.2 update-source Loopback0
 !
 address-family ipv4
  no synchronization
  network 1.1.1.1 mask 255.255.255.255
  neighbor 2.2.2.2 activate
  neighbor 2.2.2.2 send-label
  no auto-summary
 exit-address-family

 

 

R2

router bgp 1
 bgp log-neighbor-changes
 neighbor 1.1.1.1 remote-as 1
 neighbor 1.1.1.1 update-source Loopback0
 !
 address-family ipv4
  no synchronization
  network 2.2.2.2 mask 255.255.255.255
  neighbor 1.1.1.1 activate
  neighbor 1.1.1.1 send-label
  no auto-summary
 exit-address-family

 

Any other things I need to consider here?

 

thanks

 

2 REPLIES
New Member

Hello,  actually the labels

Hello,

 

 

actually the labels are here but it has the value of IMPLICIT_NULL

 

check the output of the show ip bgp x.x.x.x

 

R1#sh ip bgp 33.33.33.33
BGP routing table entry for 33.33.33.33/32, version 18
Paths: (1 available, best #1, table default)
  Not advertised to any peer
  Local
    3.3.3.3 (metric 3) from 3.3.3.3 (3.3.3.3)
      Origin incomplete, metric 0, localpref 100, valid, internal, best
      mpls labels in/out nolabel/imp-null   ---> This is the label value

 

Regards.

New Member

if you're labbing, you can

if you're labbing, you can use explicit-null just to see the labels! :)

211
Views
5
Helpful
2
Replies
CreatePlease login to create content