We have two Cat 6506 (BGP route reflectors), some Cat 3750/3550 (RR clients) and Cisco 7505 as the trigger router. We use Multi VRF CE, OSPF is the main routing protocol in every VRF, BGP is used only for distributing blackhole information.
Using following configuration I've succesfully distributed blackhole route 10.0.0.1/32 from 7505 to 6506 in the core network, but not in VRF. I must be missisng something, can you help me ?
This document is an early notification of a behaviour change that will be introduced in IOS XR release 6.5.
IOS XR configuration principles relevant for this article are:
On router platforms all interfaces must be by defaul...
With XR 4.2.0 the ASR9000 is releasing a new line of hardware models. This amongst others is the RSP440, the next generation RSP with faster switch fabric along with Typhoon based Linecards, the next generation network processor.
The Cisco EPN system incorporates a network architecture designed to consolidate multiples services on a single Multiprotocol Label Switching (MPLS) transport network. This network is designed primarily based on Application ...