Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

BRAS Config for MPLS carrying PPPoE

       Hi all

DSLAM----(PPPoE)---7600----(Xconnect)----7600----(VLAN/PPPoE)---(BRAS ASR1K)

we currently have a distributed access network where the DSLAMs send us PPPoE packets which we are wrapping into xconnects back to a central BRAS.

the xconnects terminate on the upstream device to the BRAS.  The BRAS is connected by a VLAN trunk and each DSLAM is identified by a unique VLAN-ID.

so the BRAS gets native PPPoE frames.

I wish to extend the MPLS to the BRAS itself.   So that the xconnect ( or VPLS ) terminates on the BRAS itself.

I cant see how to stitch in the PPPoE features to get this to work.

I was thinking about an external looping cable on the same BRAS device but thats a bit crap

Is there a more elegant solution?

many thanks

Everyone's tags (5)
2 REPLIES
New Member

BRAS Config for MPLS carrying PPPoE

Hi,

You can try pseudowire headend configuration. But I am not sure its avaliable for AS1K.

http://www.cisco.com/en/US/docs/routers/crs/software/crs_r4.1/lxvpn/configuration/guide/vc41vpls.html#wp1323446

New Member

Re: BRAS Config for MPLS carrying PPPoE

Hi, it seems that PWHE is available only for ASR9000 and CRS1. I saw it in the IOS feature navigator.

1622
Views
0
Helpful
2
Replies
CreatePlease login to create content