Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Can't apply service-policy to atm int?

Attempted to apply service-policy output MPLS-EGRESS to ATM Int:


class-map match-any GOLD

match mpls experimental topmost 5

match ip precedence 5

class-map match-any BRONZE

match mpls experimental topmost 3

match ip precedence 3

class-map match-any SILVER

match mpls experimental topmost 4

match ip precedence 4



policy-map MPLS-EGRESS

class GOLD

priority percent 5

set mpls experimental topmost 5

class SILVER

bandwidth percent 10


set mpls experimental topmost 4

class BRONZE

bandwidth percent 20


set mpls experimental topmost 3

class class-default

set mpls experimental topmost 0



interface ATM4/0.102 point-to-point

description TRUNK LINK TO PE_B

bandwidth 16000

ip address

no ip redirects

no ip proxy-arp

ip ospf message-digest-key xxx

no snmp trap link-status

mpls ip

pvc PE_B 10/102

tx-ring-limit 3

oam-pvc manage

encapsulation aal5snap

service-policy output MPLS-EGRESS

And it *appears* to apply without error, but logs show:

Jul 28 09:34:32.550 aest: %SCHED-3-SEMLOCKED: Virtual Exec attempted to lock a semaphore, already locked by itself -Traceback= 0x61317864 0x62658A88 0x620F0A4C 0x60DD3668 0x60DD5648 0x6135ABD8 0x61379744 0x62644508 0x626444EC

Jul 28 09:34:33.870 aest: I/f ATM4/0.102 VC 10/102 class GOLD requested bandwidth 0 (kbps), available only 0 (kbps)

And ATM4/0.102 does not include the service-policy output MPLS-EGRESS when I do a show run nor when I do a sho policy-map interface?

New Member

Re: Can't apply service-policy to atm int?

Resolved my own issue - I needed:

vbr-nrt 32000 16000

under the atm sub int...

CreatePlease to create content