Can't ping behind next-hop router when enabling mpls-ip
Basicly I have to PE router a 7604 and i 2801 router. Between the to routers it's a Vlan (Ethernet) from my ISP. When i enable mpls ip on my outside interface at the 28xx i can't ping behind my 7604 (next hop router). I can ping all interfaces at my 7604. If i remove tag-switching at my 28xx router, then I can ping all my routers. If I take my router and connect it localy, just with a layer 2 switch. Things work fine so i think this has to bee something with my ISP. I have one location working but my other location is not working. The location who is not working has a DSL (paradyn). The location who is working has a serial E2 link.
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
Introduction Basic configuration for netflow Scale parameters for
netflow Netflow support Architecture Packet flow for netflow Inside the
LC CPU Netflow Cache size, maintenance and memory Sample usage Cache
Size Aging Permanent cache Characteristics Which...