Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Command to clear the bgp vrf table.

Hi,

I want to clear the bgp table on this vrf. Here is how it looks like :-

address-family ipv4 vrf mj

redistribute connected

neighbor 12.12.12.12 remote-as 1111

neighbor 12.12.12.12 activate

neighbor 12.12.12.12 send-community

neighbor 12.12.12.12 as-override

neighbor 12.12.12.12 soft-reconfiguration inbound

neighbor 12.12.12.12 route-map customer in

neighbor 12.12.12.12 route-map vpn-routes out

neighbor 12.12.12.12 maximum-prefix 1000

neighbor 13.13.13.13 remote-as 65222

neighbor 13.13.13.13 activate

neighbor 13.13.13.13 send-community

neighbor 13.13.13.13 remove-private-as

neighbor 13.13.13.13 soft-reconfiguration inbound

neighbor 13.13.13.13 route-map a-in in

neighbor 13.13.13.13 route-map a-out out

neighbor 13.13.13.13 maximum-prefix 1000

no auto-summary

no synchronization

exit-address-family

!

I would like to confirm that the command to clear this vrf is whereby the ASN is 1110 :-

clear ip bgp vrf mj ipv4 unicast 1110 soft.

Pls advice,

InternetB.

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: Command to clear the bgp vrf table.

Hi

Yes you are right.

regards

shivlu jain

3 REPLIES
Silver

Re: Command to clear the bgp vrf table.

Hi

clear ip bgp vrf MJ 200 soft in

New Member

Re: Command to clear the bgp vrf table.

Hi Shivlu,

To confirm, since my ASN is 1110, the 200 should be replaced with my ASN number of 1110 right ?

Thank you,

InternetB.

Silver

Re: Command to clear the bgp vrf table.

Hi

Yes you are right.

regards

shivlu jain

6056
Views
5
Helpful
3
Replies
CreatePlease login to create content