07-14-2009 12:17 AM
Hi,
I want to clear the bgp table on this vrf. Here is how it looks like :-
address-family ipv4 vrf mj
redistribute connected
neighbor 12.12.12.12 remote-as 1111
neighbor 12.12.12.12 activate
neighbor 12.12.12.12 send-community
neighbor 12.12.12.12 as-override
neighbor 12.12.12.12 soft-reconfiguration inbound
neighbor 12.12.12.12 route-map customer in
neighbor 12.12.12.12 route-map vpn-routes out
neighbor 12.12.12.12 maximum-prefix 1000
neighbor 13.13.13.13 remote-as 65222
neighbor 13.13.13.13 activate
neighbor 13.13.13.13 send-community
neighbor 13.13.13.13 remove-private-as
neighbor 13.13.13.13 soft-reconfiguration inbound
neighbor 13.13.13.13 route-map a-in in
neighbor 13.13.13.13 route-map a-out out
neighbor 13.13.13.13 maximum-prefix 1000
no auto-summary
no synchronization
exit-address-family
!
I would like to confirm that the command to clear this vrf is whereby the ASN is 1110 :-
clear ip bgp vrf mj ipv4 unicast 1110 soft.
Pls advice,
InternetB.
Solved! Go to Solution.
07-14-2009 01:43 AM
07-14-2009 12:33 AM
Hi
clear ip bgp vrf MJ 200 soft in
07-14-2009 12:41 AM
Hi Shivlu,
To confirm, since my ASN is 1110, the 200 should be replaced with my ASN number of 1110 right ?
Thank you,
InternetB.
07-14-2009 01:43 AM
Hi
Yes you are right.
regards
shivlu jain
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: