Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Configuring a Pre-Shared Key on gateway device

Mr. VRuhil thank you for taht link that you sent me but unfortunately it did not help. ( the link for cisco vpn client v5.0)

What i really need is CISCO SECURE VPN CLIENT v1.0 or v1.1. Yes i know that its in the EOS/EOL now

Am using this configuration on my gateway device

Task 1—Configuring a Pre-Shared Key

And this configurations on the client side is what i wanted to do.

Task 2---Network Security policy:

1- Myconn

         My Identity = ip address

                 Connection security: Secure

                 Remote Party Identity and addressing

                         ID Type: IP subnet

                (range of inside network)

                         Port all Protocol all

                 Connect using secure tunnel

                         ID Type: IP address


                         Pre-shared key = cisco1234

         Authentication (Phase 1)

         Proposal 1

                 Authentication method: pre-shared key

                 Encryp Alg: DES

                 Hash Alg: MD5

                 SA life: Unspecified

                 Key Group: DH 1

         Key exchange (Phase 2)

         Proposal 1

                 Encapsulation ESP

                 Encrypt Alg: DES

                 Hash Alg: MD5

                 Encap: tunnel

                 SA life: Unspecified

                 no AH

2- Other Connections

             Connection security: Non-secure

             Local Network Interface

                 Name: Any

                 IP Addr: Any

                 Port: All

With Xauth enabled on the router, when the user tries to connect to a device inside the router (here a ping -t #.#.#.# was performed), a gray screen appears:

User Authentication for 3660