I have a Cisco 1841. I configure a Site to Site VPN on it, which is working fine. I have static and dynamic NAT on it which are working fine also
Now I want to configure it as an Easy VPN Server so I can access my Corporate LAN from the outside.
I set it up. I can connect to the Easy VPN Server, but I cannot ping my internal network. I got either a reply from the server ip address instead of the internal ip that i am pinging or requet timed out.
I should mention that when I set up the Easy VPN Server, it modifies my Nat rules and it prevents me from seeing outside from the servers for which I had a static nat.
This document is an early notification of a behaviour change that will be introduced in IOS XR release 6.5.
IOS XR configuration principles relevant for this article are:
On router platforms all interfaces must be by defaul...
With XR 4.2.0 the ASR9000 is releasing a new line of hardware models. This amongst others is the RSP440, the next generation RSP with faster switch fabric along with Typhoon based Linecards, the next generation network processor.
The Cisco EPN system incorporates a network architecture designed to consolidate multiples services on a single Multiprotocol Label Switching (MPLS) transport network. This network is designed primarily based on Application ...