Is there any way that I can force the path for a EoMPLC VC other that playing with the IGP ? Also since the mpls core is redundant I want the have a VC via one path and if that path fails the VC should stay down ... is this possible ?
You can actually achieve this by using MPLS TE and the tunnel selection feature.
You would first configure a tunnel, configure the pseudowire to use this specific tunnel and not to take any other path if the tunnel goes downand then configure this specific pseudowire-class on the xconnect statement.
Please refer to te following URL for more information the tunnel selection feature.
I think I've understand it. Just create the tunnel from PE to PE via a predefined path and a pseudowire-class using that tunnel and just apply the pw-class to xconnect. I wouldn't use TE since I'm not very familiar to it but I guess I will have to start look into it more closely.
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
Introduction Basic configuration for netflow Scale parameters for
netflow Netflow support Architecture Packet flow for netflow Inside the
LC CPU Netflow Cache size, maintenance and memory Sample usage Cache
Size Aging Permanent cache Characteristics Which...