Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

EoMPLSoGRE on Cisco ME 6524

Hi!

I need to implement on a pair of switches Cisco6524 EoMPLSoGRE.

Switches are directly connected to each other.

Software version is s6523_rp-ADVIPSERVICESK9-M), Version 12.2(33)SXI4a, RELEASE SOFTWARE (fc2).

When set up xconnect over MPLS on physical interfaces, all works fine and the traffic passes between the end hosts.

When I try to make it on the GRE tunnel, MPLS, it doesn't work.

In attachment scheme of this case.

How i can to solve this problem?

Thank you.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

EoMPLSoGRE on Cisco ME 6524

Hi,

you cannot solve the problem as the Me6524 does not support MPLSoGRE.

The hardware is not capable to impose/dispose MPLS labels AND perform IP GRE encapsulation at the same time.

For this to work you need 7600 with Sip-400 or ES+ WAN card or a Cat6k with Sip-400 (from SXI4 code on).

Riccardo

2 REPLIES
Cisco Employee

EoMPLSoGRE on Cisco ME 6524

Hi,

you cannot solve the problem as the Me6524 does not support MPLSoGRE.

The hardware is not capable to impose/dispose MPLS labels AND perform IP GRE encapsulation at the same time.

For this to work you need 7600 with Sip-400 or ES+ WAN card or a Cat6k with Sip-400 (from SXI4 code on).

Riccardo

Community Member

EoMPLSoGRE on Cisco ME 6524

Hi Riccardo,

Thanks for your answer! Now it is more clear for me.

Kind regards,

Roman.

468
Views
5
Helpful
2
Replies
CreatePlease to create content