Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
dfh
New Member

EXP bits with Label Stacking

In 12.0S, with ATOM or L3VPNs and label stacking which label's EXP bits are set using 'set mpls experimental' or using rate-limits? All labels in the stack?

I see the newer 'set mpls experimental' commands in 12.2 and 12.3 that can control which label's EXP bits are set; topmost, etc. However, I need 12.0S for any-to-any ATOM.

Thanks.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: EXP bits with Label Stacking

This command will set the EXP bits on all labels at label imposition. The IP Precedence bits will not be affected.

Hope this helps,

Harold Ritter
Sr. Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México
Paseo de la Reforma 222
Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México
1 REPLY
Cisco Employee

Re: EXP bits with Label Stacking

This command will set the EXP bits on all labels at label imposition. The IP Precedence bits will not be affected.

Hope this helps,

Harold Ritter
Sr. Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México
Paseo de la Reforma 222
Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México
197
Views
0
Helpful
1
Replies
CreatePlease to create content