EXP bits with Label Stacking

[dfh]

In 12.0S, with ATOM or L3VPNs and label stacking which label's EXP bits are set using 'set mpls experimental' or using rate-limits? All labels in the stack?

I see the newer 'set mpls experimental' commands in 12.2 and 12.3 that can control which label's EXP bits are set; topmost, etc. However, I need 12.0S for any-to-any ATOM.

Thanks.

[Harold Ritter · Accepted solution]

This command will set the EXP bits on all labels at label imposition. The IP Precedence bits will not be affected.

Hope this helps,