That is my opinion as well. I have not seen any common IPv6 application or driver to actually set the flow label in an IPv6 header to a non-zero value. Hence, even if Cisco or Juniper routers were somehow taking this field into account, it would not make much difference as it is currently being set to zero.
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
IntroductionIn this article we'll discuss how to troubleshoot packet
loss in the asr9000 and specifically understanding the NP drop counters,
what they mean and what you can do to mitigate them. This document will
be an ongoing effort to improve troublesh...