Help with message %MFI_LABEL_BROKER-STDBY-3-MULTIPLE_BIND
I'm running IOS 15.2(4)S1 in a Cisco 7609S with redundant RSP720s. From time to time (every 24 hours approximately) a software crash takes place and a RSP switchover takes place. Reviewing the crashinfo I always see a problem related to multiple binds in pseudowires' labels (there are only three pseudowires configured in the router acting as LER):
%MFI_LABEL_BROKER-STDBY-3-MULTIPLE_BIND: Label 20 in table 0, , l2ckt(25) [p/bm 3/0x900],ldm request info: AToM
I would be grateful if somebody could help me to understand what this message means.
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
IntroductionIn this article we'll discuss how to troubleshoot packet
loss in the asr9000 and specifically understanding the NP drop counters,
what they mean and what you can do to mitigate them. This document will
be an ongoing effort to improve troublesh...