Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

how can i inject the vrf route into globe routing table?

how can i inject the vrf route into globe routing table?

and if inject successful,which is the attribute of this vrf route in the globe routing table

thanks!

5 REPLIES
Cisco Employee

Re: how can i inject the vrf route into globe routing table?

Hi,

There is no dynamic way to leak vrf traffic into the GRT. you need to use static routes.

One for each way of traffic:

http://www.cisco.com/en/US/tech/tk436/tk832/technologies_configuration_example09186a0080231a3e.shtml

HTH

Laurent.

New Member

Re: how can i inject the vrf route into globe routing table?

Hi,

I believe by adding the "global" keyword on theh at end of a static route that route will be leaked into the grt.

eg,

ip route vrf TEST_VRF x.x.x.x x.x.x.x y.y.y.y globsl

can you give more details as to why you want to do this?

Are you trying to leak routes from vrfs into the GRT which then is advertised to an ISP MPLS VPN network?

HTH

Joe.

New Member

Re: how can i inject the vrf route into globe routing table?

have we solved your issue?

New Member

Re: how can i inject the vrf route into globe routing table?

i just receive the mail for your reply

thanks

New Member

Re: how can i inject the vrf route into globe routing table?

HI,

ip route vrf TEST_VRF x.x.x.x x.x.x.x y.y.y.y globsl

this command is only for the traffic which want to internet from vrf

but how handle with back traffic from internet on the PE,so i ask when this traffic arrive at the PE,it will auto be into vrf ,or must be do some command

thanks!

242
Views
0
Helpful
5
Replies