Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How MPLS VCs are related to LSPs?

- How an MPLS VC of a pseudowire or xconnect is related to an LSP? Example, if I have two MPLS devices and as LDP peers. How: "xconnect 100 encapsulation mpls" will be related to the LSP between and Is the MPLS VC unique on per LSP basis, per chassis basis or per MPLS cloud basis?

Thanks in advance,



Re: How MPLS VCs are related to LSPs?

William, for a pseudowire, there are 2 labels, the tunnel label(IGP label) and the VC label.

Tunnel label is the same for all VC between those 2 PE, but the VC label is unique per device.

Directed LDP session is built using the existing LSP (using the IGP label for the remote PE) between the 2 PE's. There exists 1 directed LDP session between 2 PE's.

Over the directed LDP VC labels are exchanged which are the bound to the respective VC interface. This is unique per device.



New Member

Re: How MPLS VCs are related to LSPs?

- So, will this means that any pseudowire or xconnect cause the establishment of a directed LDP session between the participant PEs?

- If I have two xconnects in A. Lets say, A->B and A->C and in both the xconnects use the VC 100. Will the VC 100 between A-B and VC 100 between A-C cause any conflict?

CreatePlease to create content