Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

How to configuration static LSP on simple MPLS network?

How to configuration static LSP on simple MPLS network?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: How to configuration static LSP on simple MPLS network?

Hello Tang,

if you are interested in static label to IPv4 mappings see the following

http://www.cisco.com/en/US/docs/ios/mpls/command/reference/mp_m2.html#wp1060671

Hope to help

Giuseppe

2 REPLIES
Hall of Fame Super Silver

Re: How to configuration static LSP on simple MPLS network?

Hello Tang,

if you are interested in static label to IPv4 mappings see the following

http://www.cisco.com/en/US/docs/ios/mpls/command/reference/mp_m2.html#wp1060671

Hope to help

Giuseppe

New Member

Re: How to configuration static LSP on simple MPLS network?

Great! Thanks for your reply!

Good luck!

3107
Views
0
Helpful
2
Replies
CreatePlease to create content