- All the "1' devices are geographically separated from all the "2" devices.
- There is a /30 linking 7606-1 and 7606-2 core routers with each other.
- MPLS is already running between the 7606's.
- pc-1 is in vlan 12 with ip 172.16.70.x/24
- switch-1 and switch-2 are in different mst regions.
I want to put pc-2 on the same ethernet segment (ip subnet) as pc-1. How do I accomplish this? I've had a look at EoMPLS but can't find anything to help me out. Should I be creating SVI's on the 7606?
interface Loopback99 description LPD ID and BGP source-update address ip address 172.16.99.1 255.255.255.255 ! interface GigabitEthernet5/6 description Connection to 7606-1 ip address 203.17.96.x 255.255.255.252 tag-switching ip ! interface Vlan100 no ip address no ip mroute-cache mpls l2transport route 172.16.99.2 100 no shut
interface Loopback99 description LPD ID and BGP source-update address ip address 172.16.99.2 255.255.255.255 ! interface GigabitEthernet4/0/2 description Connect to 7606-1 ip address 203.17.96.x 255.255.255.252 negotiation auto mpls ip ! interface Vlan100 no ip address no ip mroute-cache mpls l2transport route 172.16.99.1 100 no shut
If I am to use SVI on the 7606's, how do I get this working with the switches? We primarily use WS-C3560G switches (12.2(40)SE) but I can't issue any xconnect commands on the switch ports.
I guess it's easy enough to create SVI on the 7606's and then add in the xconnect configuration but how do I then get the switches to particpate in EoMPLS so that the devices connected to the switch ports on switch-1 and switch-2 appear as if they are in the same ethernet segment???
PC(192.168.1.10)----Vlan 10-----Switch-----Vlan10-----(Intiate xconnect from this interface-Router(PE))--------------------------Router(PE)Xconnect Termination-------Vlan 10-------Switch-----------PC(192.168.1.11)
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
Introduction Basic configuration for netflow Scale parameters for
netflow Netflow support Architecture Packet flow for netflow Inside the
LC CPU Netflow Cache size, maintenance and memory Sample usage Cache
Size Aging Permanent cache Characteristics Which...