Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to do targetted LDP session on MPLS?

Hi All,

I need to configure targetted LDP on my PE router. Can you please help me on this?

Thank you,

siva

2 REPLIES

Re: How to do targetted LDP session on MPLS?

HI Siva,

Sample Config with N/W eg:

PE3 ----> P ----> PE4

PE3:

----

mpls ldp neighbor 172.16.0.4 targeted ldp

PE4:

----

mpls ldp neighbor 172.16.0.3 targeted ldp

1) Before the 'config' ensure the IGP reach ability between PE3-PE4 is Up & Running.

2) LDP between PE3-P & P-PE4 is Up & Running.

Please see below some show output after successful configuration:

From PE3:

---------

PE3#sh mpls ldp nei

Peer LDP Ident: 172.16.0.4:0; Local LDP Ident 172.16.0.3:0

TCP connection: 172.16.0.4.35909 - 172.16.0.3.646

State: Oper; Msgs sent/rcvd: 37/36; Downstream

Up time: 00:00:10

LDP discovery sources:

Targeted Hello 172.16.0.3 -> 172.16.0.4, active, passive

Addresses bound to peer LDP Ident:

172.16.34.2 172.16.0.4 172.16.46.1 172.16.11.1

172.16.4.1

From PE4:

---------

Peer LDP Ident: 172.16.0.3:0; Local LDP Ident 172.16.0.4:0

TCP connection: 172.16.0.3.646 - 172.16.0.4.35909

State: Oper; Msgs sent/rcvd: 38/41; Downstream

Up time: 00:02:34

LDP discovery sources:

Targeted Hello 172.16.0.4 -> 172.16.0.3, active, passive

Addresses bound to peer LDP Ident:

172.16.0.3 172.16.34.1 172.16.36.1 172.16.10.1

172.16.3.1

Hope I am Informative, Pls Rate if HELPS

Best Regards,

Guru Prasad R.

Cisco Employee

Re: How to do targetted LDP session on MPLS?

Siva,

There is a very limited number of scenarios in which you need to explicitly configure targeted LDP. Most of the time the targeted LDP session will be implicitly configured by either configuring VPLS, EoMPLS or LDP over TE tunnels. Could you please tell us what you are trying to achieve.

Regards

Harold Ritter
Sr. Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México 
Paseo de la Reforma 222 Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México
270
Views
5
Helpful
2
Replies