Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

How to map,e.g. conceptual control plane to physical element?

Route processor = control plane (customer, provider) in layer 3

Line card = data plane in layer 2& layer 3

where is management plane?

Thanks

2 REPLIES
Hall of Fame Super Silver

Re: How to map,e.g. conceptual control plane to physical element

Hello Karen,

>> where is management plane?

Again in route processor that communicates internally with all linecards

Hope to help

Giuseppe

Re: How to map,e.g. conceptual control plane to physical element

Hi

When you configure MP you can see the logging for same . The log you will get

Aug  2 15:25:32.846: %CP-5-FEATURE: Management-Interface feature enabled on Control plane
host path

It shows that the MP work over Control plane. Means in Route processor  the MP will take palce.

Regards

Chetan Kumar

230
Views
0
Helpful
2
Replies