Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

How to Stream the Video with MPLS Network?

Hi guys,

i'd like to ask you.

i've  a final project about "how to stream the video with mpls network", but  im confused in vpn n mpls configuration, anyone could help me? what  should i choose for vpn service? vll, vpls or vprn?

here is my topology :

topology.png

the  result is, computer client could stream the video n sound from server.  oh yeah, i forget, what kind of application should i use for client? vpn client?

thanks alot guys, i need ur suggestion

best regards,

Prasetyatama

1 REPLY
Cisco Employee

How to Stream the Video with MPLS Network?

Hi Prasetyatama,

Is that a plain MPLS network or L3VPN setup?.

If the setup is L3VPN (assuming R1 and R6 as PE devices), you can either  use mGRE or multipoint LSP as P-tunnel. Incase of mGRE, you need to enable multicast on all core devices and incase of MP-LSP, you need mLDP feature supported. Below are few link about MVPN over mGRE or Label switched Multicast,

http://www.cisco.com/en/US/tech/tk828/tech_digest09186a00801a64a3.html

http://www.cisco.com/en/US/docs/ios-xml/ios/ipmulti_lsm/configuration/15-1s/imc-lsm-15-1s-book.pdf

On a plain MPLS network, you need to enable multicast on all routers and it is not different from multicast over non-mpls core network. Curently, LSM is not supported for this scenario.

HTH,

Nagendra

447
Views
0
Helpful
1
Replies
CreatePlease to create content