We have a network of 10 IGXs running on Leased Lines serving the Voice & Dataconnectivity needs.. Now our Service Provider is offering Managed MPLS services.. Managed in the sense, he provides the Edge Router & asking us to just connect the Ethernet from our Switch to him.. This finds okay for Data.. However we have most of our BW only on Voice, Is there any Option someone can think of Integrating IGX traffic to go via the MPLS network... The Need is how to connect IGXs using ATM Trunks (UXMs) thru the MPLS network. ... Any suggestions Pls.
How will be the Physical Connectivity between the URM (Fast Ethernet), UXM(E1) & Managed MPLS Router..
Sorry, I was not clear... If you have no objections, Can you let me know your telephone number if you are in US or Uk.. I can reach you for more discussions if required.. Are you aware of any working setups like the one suggested ?
The URM is essentially an IP blade in the IGX platform. The URM has an atm OC3 interface that would connect to the IGX backplane . For details on using the IGX and URM for MPLS services, please check the following url .
This document is an early notification of a behaviour change that will be introduced in IOS XR release 6.5.
IOS XR configuration principles relevant for this article are:
On router platforms all interfaces must be by defaul...
With XR 4.2.0 the ASR9000 is releasing a new line of hardware models. This amongst others is the RSP440, the next generation RSP with faster switch fabric along with Typhoon based Linecards, the next generation network processor.
The Cisco EPN system incorporates a network architecture designed to consolidate multiples services on a single Multiprotocol Label Switching (MPLS) transport network. This network is designed primarily based on Application ...