Running inter-as MP-BGP multicast between PE's using MDT under the VRF without a problem. Problem is GRE dynamic tunnel is built using my loopback interface in the global routing table and not in the VRF. All PIM/MSDP is done on loopback interface within the VRF between PE's so when i block AUTO-RP messages (126.96.36.199/188.8.131.52) between PE's, AUTO-RP messages is still exchange on loopback interface in the global since MDT is using that to build the GRE dynamic tunnel. Is it possible to be selective on which interface MDT uses to build dynamic GRE tunnel between PE's?
We support MTR on 7600. With MTR, you have a dedicated table for RPF check and you decide which routes from the unicast tables you want to import on the RPF table. But you have only one RPF table even if you have several unicast RIB (or topologies)
The Cisco EPN system incorporates a network architecture designed to consolidate multiples services on a single Multiprotocol Label Switching (MPLS) transport network. This network is designed primarily based on Application Engineered...
Internet security is important with the increasing attacks that are happening every day. Many internet and browsing security solutions exist, but some are not very easy to use or maybe the question is how can I enable them?
Cisco Software Manager Server
This document describes the programmatic interfaces, RESTful APIs, which are supported by Cisco Software Manager Server (CSM Server).
CSM Server supports a set of finite RESTful APIs. The fir...