We are trying to understand the way QOS works on inter-AS VPN option C deployment. Assuming there are three MPLS vendors,name it as SP1,SP2 and SP3. The customer site are hanging between SP1 and SP3,Where SP2 act as a pass through (i.e C1-SP1-SP2-SP3-C2)......How the QOS mapping with EXP would be carried to SP2 and SP3...The basic reason to understand this is,Whether SP2 needs to know about EXP marking of SP1,so that end to end QOS would be acheived for this customer.
1. Introduction Internet security is important with the increasing
attacks that are happening every day. Many internet and browsing
security solutions exist, but some are not very easy to use or maybe the
question is how can I enable them? In this referen...
Cisco Software Manager Server API Guide This document describes the
programmatic interfaces, RESTful APIs, which are supported by Cisco
Software Manager Server (CSM Server). Overview CSM Server supports a set
of finite RESTful APIs. The first step to use ...
If you are using Cisco's new linux-based Cisco Software Manager server,
then you probably want to make sure there is a startup service for
it.I'll assume that you've already installed the CSM server on a
systemd-based linux system. The commands given belo...