Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Intermittent ping drop on MPLS VSAT link.

We have a client connected through VSAT. I am at Service Provider place and client is connected through VSAT link in MPLS cloud. I am facing intermittent ping drop in the tunnel interface terminated at other end. Pl help how do i check the trouble shoot the problem.

4 REPLIES
Silver

Re: Intermittent ping drop on MPLS VSAT link.

hi amit

could you check if you remove the vrf from tunnel interface whats the response in that case ?

regards

shivlu jain

New Member

Re: Intermittent ping drop on MPLS VSAT link.

Thanks for u r reply

we had set mtu size 1420 on the tunnel interface. Till now I had not receive any ping drop. Hope this will work.

I will try with removing vrf if this will occure again.

New Member

Re: Intermittent ping drop on MPLS VSAT link.

When I apply MTU as 1420 on the tunnel interface and when check by show int tunnel xxx. I still get 1514 mtu set on the tunnel interface. Why ?

Silver

Re: Intermittent ping drop on MPLS VSAT link.

actually you have configured ip mtu thats why you were not able to see on interface. If you change then mtu with only mtu command then it will be changed.

only MTU is realted to harware

ip mtu "IP MTU is used to determine whether a non-labeled IP packet forwarded through an interface has to be fragmented (the IP MTU has no impact on labeled IP packets). It has to be lower or equal to hardware MTU (and this limitation is enforced).

kindly check

http://blog.ioshints.info/2007/10/tale-of-three-mtus.html

regards

shivlu jain

953
Views
0
Helpful
4
Replies