I want to use my existing 6504E as my Internet router, the router will connect to an ONS using STM1 interface. I will be running E-BGP with my Tier1 ISP while some customers will connect to my network using BGP, others will be breakout of my network.
Presently I have the following in my 6504E:
Supervisor Engine 720 (Active)WS-SUP720-3B
Policy Feature Card 3 WS-F6K-PFC3B
MSFC3 Daughterboard WS-SUP720
In order to meet the requirements of the Internet connection, especially the connection to ONS (SDH), I intend to purchase the following modules:
1. Cisco 7600 Series SPA Interface Processor-200 [Cisco 7600 SIP-200]
2. Cisco 2-Port OC-3c/STM-1c POS Shared Port Adapter [SPA-2XOC3-POS]
This document is an early notification of a behaviour change that will be introduced in IOS XR release 6.5.
IOS XR configuration principles relevant for this article are:
On router platforms all interfaces must be by defaul...
With XR 4.2.0 the ASR9000 is releasing a new line of hardware models. This amongst others is the RSP440, the next generation RSP with faster switch fabric along with Typhoon based Linecards, the next generation network processor.
The Cisco EPN system incorporates a network architecture designed to consolidate multiples services on a single Multiprotocol Label Switching (MPLS) transport network. This network is designed primarily based on Application ...