S* 0.0.0.0/0 is directly connected, 00:05:32, Null0 S 188.8.131.52/8 is directly connected, 00:06:00, Null0
But only the specific one is advertised via MP-IBGP:
RP/0/0/CPU0:03-ASBR2#show bgp vpnv4 unicast rd 172.16.10.102:103 advertised neighbor 172.16.10.11 summary Network Next Hop From AS Path Route Distinguisher: 172.16.10.102:103 184.108.40.206/8 172.16.10.102 Local ?
Processed 1 prefixes, 1 paths
The question is: why is the default 0/0 route not advertised, and how can I configure the box so that it's advertised?
This document is an early notification of a behaviour change that will be introduced in IOS XR release 6.5.
IOS XR configuration principles relevant for this article are:
On router platforms all interfaces must be by defaul...
With XR 4.2.0 the ASR9000 is releasing a new line of hardware models. This amongst others is the RSP440, the next generation RSP with faster switch fabric along with Typhoon based Linecards, the next generation network processor.
The Cisco EPN system incorporates a network architecture designed to consolidate multiples services on a single Multiprotocol Label Switching (MPLS) transport network. This network is designed primarily based on Application ...