Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Silver

IOS XR ping failure

Hello. I'm fairly new to IOS XR... well, not that new, but I do not understand the following.

I can ping Lo0 interface from the LocationY, and Ping goes both ways, to XR the request, and XR sends the reply back. It all works.

But when I ping from Lo0 on XR to LocationY (So request and reply are reversed) it does not work and returns UUUUU (Unreachable)

This is MPLS network, but how is it possible that communication can work like this? It's same outgoing/incoming interface.

Any ideas how can I start troubleshooting this even? all related interfaces are not in VRFs, all host routes are present.

This is a copy from output:

Ping from location Y to XR works (sending ping from location Y and debugging on XR, on the other side it's all !!!)

RP/0/9/CPU0:PH700-EA2#debug ip icmp

RP/0/9/CPU0:PH700-EA2#LC/0/0/CPU0:Apr 10 14:57:47 : ipv4_io[171]: IPv4 ICMP: TenGigE0/0/0/0: Received echo request from y.y.y.y

LC/0/0/CPU0:Apr 10 14:57:47 : ipv4_io[171]: IPv4 ICMP: TenGigE0/0/0/0: Sending echo reply to y.y.y.y

LC/0/0/CPU0:Apr 10 14:57:48 : ipv4_io[171]: IPv4 ICMP: TenGigE0/0/0/0: Received echo request from y.y.y.y

LC/0/0/CPU0:Apr 10 14:57:48 : ipv4_io[171]: IPv4 ICMP: TenGigE0/0/0/0: Sending echo reply to y.y.y.y

Ping from XR to location Y does not work.

RP/0/9/CPU0:PH700-EA2#show interfaces lo0 | in Internet

Internet address is x.x.x.x/32

RP/0/9/CPU0:PH700-EA2#ping y.y.y.y source x.x.x.x

Type escape sequence to abort.

Sending 5, 100-byte ICMP Echos to y.y.y.y, timeout is 2 seconds:

UUUUU

Success rate is 0 percent (0/5)

2 REPLIES
Cisco Employee

Re: IOS XR ping failure

Pavlo,

I would start with activating "deb ip icmp" on the XR router and then try the failing ping to see what is the router sending the ICMP unreachable message.

Regards,

Harold Ritter
Sr. Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México
Paseo de la Reforma 222
Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México
Silver

Re: IOS XR ping failure

Thanks, i did that, but the router did not produce any output for the locally originated pings.

But I found out the problem - there is a statefull firewall in the way... ehm...

485
Views
0
Helpful
2
Replies
CreatePlease to create content