I have a Cisco 7204VXR with a NPE175 and 64 MG. I am using the IOS c7200-js-mz.122-32.bin. My problem is that I cannot form the VRF in "ip nat inside source list 2 interface loopback 2 vrf XXXXX overload". The commando vrf does not appear to me. An example:
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
IntroductionIn this article we'll discuss how to troubleshoot packet
loss in the asr9000 and specifically understanding the NP drop counters,
what they mean and what you can do to mitigate them. This document will
be an ongoing effort to improve troublesh...