I have two questions here if anybody can through some light on this.
Q1) How do I assign a dynamic IPv6 address to a PPP Session via RADIUS. Only way I could get the IPv6 address assigned to the client is via a local IPv6 Prefix pool on the Access Server. Using local pools is impossible to manage if the remote devices are managed CPE's.
Q2) When I have a PPP session attached to my access server using IPv6, when I issue the "show users" command, I can see that the user is attached to a virtual access interface but the IPv6 address is not displayed as it does when using IPv4.
Any ideas
Thanks in advance.
Derek.