is there any default behavior for EXP 5 in 7609 sup720 pfc3b
we build network using 7609 sup720 pfc3b sup32 pfc3b and sip400 sip200 pos .
i found a problem, i did't config any policy through mpls vpn LSP path. i use smarbit send 100M traffic into mpls vpn lsp, the lowest bandwidth is 155m pos of this path, when i mark traffic into exp 3. the performance is ok, no lost packet.
when i config ip precedence 5/exp 5. the traffic lost 50% packet.
is there any default behavior for EXP 5 in 7609 sup 720 pfc 3b/pfc 3b
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
Introduction Basic configuration for netflow Scale parameters for
netflow Netflow support Architecture Packet flow for netflow Inside the
LC CPU Netflow Cache size, maintenance and memory Sample usage Cache
Size Aging Permanent cache Characteristics Which...