We have a point to point metroethernet line from our telecom between our two different locations. Behind the ME swithes of teelcom there is a 6513 switch in one side and a 3845 router at the other side. There is a SPA VPN module on 6513 and we are encrypting the traffic.
We need to pass L2 traffic (tagged) on this line. I want to use the same VLAN at the both side. Is it possible? How can I make the configuration?Any help will be highly appreciated.
This document is an early notification of a behaviour change that will be introduced in IOS XR release 6.5.
IOS XR configuration principles relevant for this article are:
On router platforms all interfaces must be by defaul...
With XR 4.2.0 the ASR9000 is releasing a new line of hardware models. This amongst others is the RSP440, the next generation RSP with faster switch fabric along with Typhoon based Linecards, the next generation network processor.
The Cisco EPN system incorporates a network architecture designed to consolidate multiples services on a single Multiprotocol Label Switching (MPLS) transport network. This network is designed primarily based on Application ...