I have a setup of layer2 VPN (xconnect) from 7609 to 7609. The customer is connected to 7609 port directly. Now i have shifted a customer on 3750 switch port & created a sub-interface on 7609, but customer is facing some degradation in traffic. I don't see any errors/packet drops/collisions/etc. I checked the MTU size on 3750 is 1500, and i haven't configured MTU parameters on 7609 as well.
What would be the suspected issue? Ping result is fine end-to-end. No QoS is implemented.
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
Introduction Basic configuration for netflow Scale parameters for
netflow Netflow support Architecture Packet flow for netflow Inside the
LC CPU Netflow Cache size, maintenance and memory Sample usage Cache
Size Aging Permanent cache Characteristics Which...