Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Silver

l2tpv3 dialing from cisco router

I have requirement where customer wants ip dialing to LNS from cisco router with the help of l2tpv3.

Could anyone tell me how to configure this.

regards

shivlu jain

4 REPLIES
Hall of Fame Super Silver

Re: l2tpv3 dialing from cisco router

Hello Shivlu,

in one of our routers the backup link is configured in this way

pseudowire-class netvision-l2tp

encapsulation l2tpv2

!

interface Virtual-PPP1

description NETVISION DIALER

ip address negotiated

ip nat outside

ip virtual-reassembly

no cdp enable

ppp pap sent-username password 0 41003827

pseudowire x.x.x.x 2 pw-class netvision-l2tp

crypto map VPN_MAP

!

where x.x.x.x is a public ip address

ip route x.x.x.x 255.255.255.255 g0/1

completes this solution where this g0/1

sh run int gi0/1

Building configuration...

Current configuration : 157 bytes

!

interface GigabitEthernet0/1

description CONNECTION TO CABLE MODEM

ip address dhcp

ip virtual-reassembly

duplex auto

speed auto

media-type rj45

end

and it receives a private ip address from DHCP on a cable modem access network.

but it uses l2tpv2 not L2tpv3 and I've always seen l2tpv2 in this context.

Hope to help

Giuseppe

Silver

Re: l2tpv3 dialing from cisco router

hi Giuseppe

I already got the solution and it is the same as provided by you.

Really thanks for your help.

regards

shivlu jain

Hall of Fame Super Silver

Re: l2tpv3 dialing from cisco router

Hello Shivlu,

and is it working with L2TPv3 ?

Best Regards

Giuseppe

Silver

Re: l2tpv3 dialing from cisco router

hi Giuseppe

It is working with l2tpv2

regards

shivlu jain

286
Views
0
Helpful
4
Replies