Hi there
I've got some problems with QoS for one of our L3 VPN customers.
Our network consist of 76xx / SUP720-3B routers with SIP400 interfaces for core facing and various LAN interfaces for customer facing.
The customer VRF interfaces are configured as ordinary Vlan SVI's, e.g.
interface vlan123
ip vrf forwarding VPN
ip address 1.1.1.1 255.255.255.252
!
When setting up the VPN for QoS, I've done some digging and decided that "Short Pipe mode" is the right type for me. I've configred the system just as described in the manual for 7600 SR software, but I still don't get any QoS settings transferred across my network. Actually a "show mls qos" tell me, that I'm currently using "Pipe mode" for the MPLS VPN.
Anyone who might have some relevant information to share on QoS on L3 VPN MPLS.
Regards,
Lars
