Hello,
I am trying to filter LDP label bindings to only advertise my loopback
address(for vpnv4 traffic) but I am unsure as to what the requirements are.
Here is what I have:
PE1#show ip route connected | in ^C
C 1.1.1.0 is directly connected, Serial1/0
C 10.0.0.1 is directly connected, Loopback0
C 150.0.0.0 is directly connected, FastEthernet0/1
PE1#sh run | in tag
no tag-switching advertise-tags
tag-switching advertise-tags for ldp-filter
PE1#show access-lists ldp-filter
Standard IP access list ldp-filter
10 permit 10.0.0.0, wildcard bits 0.0.0.255 (6 matches)
999 deny any (7 matches)
matches?
but still generates a binding for all my connected interfaces:
PE1#show mpls ldp bindings 150.0.0.0 24
tib entry: 150.0.0.0/24, rev 2
local binding: tag: imp-null
remote binding: tsr: 25.25.25.25:0, tag: 18
PE1#
And the other side tags it with a label:
PE2#traceroute 150.0.0.1
Type escape sequence to abort.
Tracing the route to 150.0.0.1
1 1.1.1.5 [MPLS: Label 18 Exp 0] 16 msec 52 msec 24 msec
2 1.1.1.1 24 msec 52 msec *
TIA,
