Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

LMI mismatch in MPLS

We have a MPLS link in layer 2

it is a point to multi point link

in one remote end if we put

show fram-relay lmi it is showing

no.of status enq sent:80352 no of status msg recieved 80079

no of update status recieved 0

no of status timeouts 1100

and it has crc errors and input errors,

can any one guide me.

2 REPLIES
Purple

Re: LMI mismatch in MPLS

The kinds of errors you are seeing are a result of line conditions - LMI is not the main problem here. I suggest you get your carrier to test the line to see that it runs clean.

Paresh

New Member

Re: LMI mismatch in MPLS

Hi

Mmmm normally LMI involves in Frame Relay network. I assume that you are using Frame Relay connection as a local access to MPLS network. Am I right?

I agree with Paresh. You have to check with your carries to test the line.

jasrine47

http://ciscorouterconfig.blogspot.com/

195
Views
0
Helpful
2
Replies
CreatePlease to create content