We have a central site hosted in datacentre with many remote locations.
At remote locations we have dual cisco 1841 router with dual service provider on the WAN side.
What is the best possible soluton to acheive load sharing of network traffic from remote location lan to central site datacentre.
Is ebgp on WAN side and ibgp on lan side between both the remote location router a desired solution.
Also there is a Layer3 switch at remote locations with different vlans.
Is HSRP a viable option between both the routers of remote location.
Any other solution for maintaining load sharing and redundancy of wan gateway enroute to datacentre.
Just to summarize:- We want remote location traffic to be loadshared between both the router and at the same time in case of any wan link going down it should be routed via other wan router enroute to the datacentre.
Pls suggest how can we achieve traffic loadbalancing and redundancy.
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
Introduction Basic configuration for netflow Scale parameters for
netflow Netflow support Architecture Packet flow for netflow Inside the
LC CPU Netflow Cache size, maintenance and memory Sample usage Cache
Size Aging Permanent cache Characteristics Which...