It supports on all 24+38 ports but only problem with 24 ports is they are designed on shared bus architecture Ex:-1,2,4 ports shares a single bus so overall throughput will be 1gig.Definately, its a constraint when you are using electrical ports as uplink. you need to be selective in choosing the ports.
Use the rating system if you find the reply is useful
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
Introduction Basic configuration for netflow Scale parameters for
netflow Netflow support Architecture Packet flow for netflow Inside the
LC CPU Netflow Cache size, maintenance and memory Sample usage Cache
Size Aging Permanent cache Characteristics Which...