Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Migration to mpls from qinq

Hi guys,

We are in aprocess to implement the mpls l2 Vc on our network

by replacing the qinq l2 structure in our field, for doing so we

have to replace the present devices which takes some cost to the management.

In the mean while, can i know what are the main advantages of this approach.

4 REPLIES
New Member

Re: Migration to mpls from qinq

The main pro that I have seen from this is mainly the EVC structure. You are no longer bound to having single outer tag manipulation with QinQ. You can perform outer tag pop, push, translate, etc all based on some parameters that can be highly granular. I would recommend looking into the EVC structure for more thorough understanding.

Sent from Cisco Technical Support iPhone App

Re: Migration to mpls from qinq

To rephrase your question, what are you basically asking is, what are the advantages of running ip mpls compared to pure l2 switched infrastructure.

And I believe you know the answer

adam

adam
New Member

Migration to mpls from qinq

Hi Guys,

Here i want to know the advantages of EoMpls over the qinq network layout..

Regards

Kumar

Cisco Employee

Migration to mpls from qinq

Hi Anand! Should you need some help in knowing the right equipment to replace your old ones I'd be more than happy to help. You can send an email to ipinile@cisco.com

366
Views
0
Helpful
4
Replies
CreatePlease to create content