I was wondering what are the recommended techniques for monitoring large scale (hundreds or thousands of links) QoS deployments.
We have deployed QoS only selectively to date but are starting large scale deployment of VoIP (thousands of handsets).
We have QPM 3.2 which we have not invested much time in as yet to really understand how it works. Would you recommend it for monitoring QoS performance or is it primarily deployment?
For really critical systems I have found IP SLA simulating calls and reporting when the call quality falls is very useful.
I was also thinking that monitoring QoS syslog may be the most effective method of monitoring hundreds of links and devices including switches, routers, vpns, firewalls etc. What facility codes would these messages come in as for switches (CatOS, IOS) and routers?
1. Introduction Internet security is important with the increasing
attacks that are happening every day. Many internet and browsing
security solutions exist, but some are not very easy to use or maybe the
question is how can I enable them? In this referen...
Cisco Software Manager Server API Guide This document describes the
programmatic interfaces, RESTful APIs, which are supported by Cisco
Software Manager Server (CSM Server). Overview CSM Server supports a set
of finite RESTful APIs. The first step to use ...
If you are using Cisco's new linux-based Cisco Software Manager server,
then you probably want to make sure there is a startup service for
it.I'll assume that you've already installed the CSM server on a
systemd-based linux system. The commands given belo...