MPLS DS-TE IETF and MAM/RDM selection on Cisco IOS platforms
I read that in IOS 12.2(33)SRB-C-D-E there are new CLI commands to include the IETF DS-TE. In this way we can use the MAM or RDM model for MPLS-TE in IOS using the new command "mpls traffic-eng ds-te bc-model [rdm | mam]"
I'm unable to find this command for release 15.1 or 15.2 of IOS software. It seems to me that this is available only in some IOS platforms (like 7600?) and only for 12.2(33)SR releases but I cannot find a confirmation of this. The question is if there is a full support for IETF DS-TE with IOS and for what kind of platforms.
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
IntroductionIn this article we'll discuss how to troubleshoot packet
loss in the asr9000 and specifically understanding the NP drop counters,
what they mean and what you can do to mitigate them. This document will
be an ongoing effort to improve troublesh...