Hi ! I am looking for some recommendations regarding enabling mpls ip in core network. We have a standard service policy that classifies/tags packets based on port number ie. Citrix 1494 etc. This service-policy does not work when we mpls enable the interfaces because of the tag and is expected behaviour. Our main usage for MPLS will be to transport VPN's. To overcome the service-policy problem myy suggestion has therefore been to add some filtering that only allows mpls tagged traffic between BGP-MP peers with the following commands:
no mpls ldp advertise-lables
mpls ldp advertise-lables for acl_BGP_PEERS
I have tested this in lab and it work great but has to be added on every mpls enabled router in the network. Do you have any better suggestions or see any problems that this could cause ? I also read that its best practice to not enable MPLS for the whole core in a customer network as it doubles the memory usage for routing tables etc. What do you think ?
1. Introduction Internet security is important with the increasing
attacks that are happening every day. Many internet and browsing
security solutions exist, but some are not very easy to use or maybe the
question is how can I enable them? In this referen...
Cisco Software Manager Server API Guide This document describes the
programmatic interfaces, RESTful APIs, which are supported by Cisco
Software Manager Server (CSM Server). Overview CSM Server supports a set
of finite RESTful APIs. The first step to use ...
If you are using Cisco's new linux-based Cisco Software Manager server,
then you probably want to make sure there is a startup service for
it.I'll assume that you've already installed the CSM server on a
systemd-based linux system. The commands given belo...