Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

MPLS L2 link on FR encapsulation with DS3 interface

Dear all,

After changing encapsulation to FR on DS3 interface . the sub-interface is not taking xconnect command.

Please help in this matter

NDL-MPL-PE-RTR-00#

interface Serial9/7

description ##

no ip address

mls qos trust dscp

dsu bandwidth 44210

framing c-bit

cablelength 10

no cdp enable

encapsulation frame-relay IETF

frame-relay lmi-type ansi

frame-relay intf-type dce

interface Serial9/7.101 point-to-point

description ##

no ip address

mls qos trust dscp

cablelength 10

no cdp enable

frame-relay interface-dlci 101

xconnect 202.123.47.X 101 encapsulation mpls

Thanks & Regards

1 REPLY
Hall of Fame Super Silver

Re: MPLS L2 link on FR encapsulation with DS3 interface

Hello Mahesh,

what platform and what release are you using ?

Hope to help

Giuseppe

236
Views
0
Helpful
1
Replies