Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

MPLS LDP on Cisco2921

Hello. We have cisco 2921:

Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.0(1)M1, RELEASE SOFTWARE (fc1)

Technology Package License Information for Module:'c2900'

----------------------------------------------------------------

Technology    Technology-package          Technology-package

              Current       Type          Next reboot

-----------------------------------------------------------------

ipbase        ipbasek9      Permanent     ipbasek9

security      securityk9    Permanent     securityk9

uc            None          None          None

data          None          None          None

I need to test "Configuring MPLS LDP Autoconfiguration with OSPF Interfaces" like this link:

http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_ldp_autoconfig.html

but in the global configuration mode "mpls ip" is not active:

C2921(config)#mpl?

% Unrecognized command

In the documentation I find that C2921 support MPLS, what is the problem ?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: MPLS LDP on Cisco2921

Hi Alex,

As you can see from the output you have posted yourself, it does not:

----------------------------------------------------------------

Technology    Technology-package          Technology-package

              Current       Type          Next reboot

-----------------------------------------------------------------

ipbase        ipbasek9      Permanent     ipbasek9

security      securityk9    Permanent     securityk9

uc            None          None          None

data          None          None          None

This is also described in the following document:

http://www.cisco.com/en/US/prod/collateral/routers/ps10616/white_paper_c11_556985_ps10537_Products_White_Paper.html#wp9000809

You will need to obtain the DATA license in order to use the MPLS support.

Best regards,

Peter

4 REPLIES
Cisco Employee

MPLS LDP on Cisco2921

Alex,

I suspect that the MPLS is supported in the DATA license. You will need to purchase the DATA license, or activate a temporary (evaluation) license if such is available.

Best regards,

Peter

New Member

MPLS LDP on Cisco2921

our router have SEC/K9 license, this license not include Data feature ?

Cisco Employee

Re: MPLS LDP on Cisco2921

Hi Alex,

As you can see from the output you have posted yourself, it does not:

----------------------------------------------------------------

Technology    Technology-package          Technology-package

              Current       Type          Next reboot

-----------------------------------------------------------------

ipbase        ipbasek9      Permanent     ipbasek9

security      securityk9    Permanent     securityk9

uc            None          None          None

data          None          None          None

This is also described in the following document:

http://www.cisco.com/en/US/prod/collateral/routers/ps10616/white_paper_c11_556985_ps10537_Products_White_Paper.html#wp9000809

You will need to obtain the DATA license in order to use the MPLS support.

Best regards,

Peter

New Member

Re: MPLS LDP on Cisco2921

thanks, you are right...

1476
Views
0
Helpful
4
Replies